XGPS150E
2
3
Power switch
. Firmly press and hold the power
icon for approximately 3 seconds to turn the de-
vice on or off.
Low battery indicator
. This light will flash red
when the battery level is low and the device re-
quires recharging. (See
Charging the XGPS150E
on page 14.) During charging the light will glow
red, and it will change to green when charging is
complete. This light is normally off while the XG-
PS150E is running.
Bluetooth status indicator.
This light will indicate
whether the XGPS150E is searching for a device
to connect to, negotiating a connection with a
device, or has successfully paired to a device. A
slow flash (about once per second) indicates the
XGPS150E is available to connect to another de-
vice. A quick flash (approx. 5 times per second)
Introduction
Thank you for purchasing the XGPS150E Univer-
sal Bluetooth
®
GPS Receiver from Dual Electron-
ics.
The XGPS150E works with signals from GPS sat-
ellites to determine your location anywhere in the
world. It then can transmit your location informa-
tion to many kinds of devices which have Blue-
tooth connectivity and support the Bluetooth Serial
Port Profile (SPP). This includes:
• the iPad
®
(generations 1 and 2)
• the iPod touch
®
(generations 2 through 4)
• the iPhone
®
(generations 2 through 4)
You can also connect the XGPS150E to many
Android
®
, Windows
®
or Blackberry
®
smart phones
and tablets, as well as to notebook computers run-
ning Windows or OS X.
NOTE: Not all manufacturers include SPP in their
devices, even if the device has Bluetooth. Please
consult the owner’s manual for your specific de-
vice to determine whether it supports SPP. Some
devices, like Android-based devices, may need
a helper app to connect to the XGPS150E. See
Pairing with your device
on page 7 for more in-
formation.
Bluetooth status indicator
Power on/off (push & hold for 3 seconds)
Battery
level
indicator
GPS
status
indicator
Features
