20
AC216Bi
OPERATION
Bluetooth Operation
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your
device before you begin the pairing process.
The unit broadcasts the pairing signal constantly
when no devices are currently connected. Complete the
pairing sequence from your Bluetooth device. Refer to the
owner's manual for your device for more details.
The device name is "Dual BT"
The Bluetooth passcode "1234"
Note:
The unit can be in any mode of operation
when pairing is performed.
If a device is currently connected, press and hold
to
disconnect the current device before a new device can
be paired. Then begin the pairing sequence from the new
Bluetooth device.
Most Bluetooth devices support the auto-connect feature,
and will connect automatically if the device is in range when
the unit is powered-on. If your device was previously
paired but does not connect, use these instructions below.
• If your most recently connected Bluetooth device becomes
disconnected or does not reconnect, press and hold
from Bluetooth mode to reconnect your mobile device.
• To connect a previously paired device that was not
recently connected:
1) If applicable, press and hold
to disconnect any
connected mobile devices.
2) From Bluetooth mode, press the
volume knob
"Paired
Devices" will appear on the LCD.
3) Turn the volume knob to cycle through the list of devices.
4) Press
SELECT
or
to connect to the desired device. It
must be in range to connect.
Press and hold
for 3 seconds to disconnect a connected
device. The device will remain paired and appear in the
SEARCH menu, but not be connected.
Pairing a New Device
Pairing Additional
Devices
Connecting a
Paired Device
Disconnecting
a Device
