Axor Bouroullec, Instructions For Use Manual

Page: 7 / 80

0 7 EN
A S S E M B L Y (see page 60)
F A U L T C A U S E R E M E D Y
⁄ Insufficient water ⁄ Supply pressure inadequate ⁄ Check water pressure (If a pump has
been installed check to see if the
pump is working).
⁄ Filters are dirty ⁄ Clean filter in front of the mixer and on
the MTC-thermo cartridge (A)
⁄ Shower filter seal dirty ⁄ Clean filter seal between shower and
hose
⁄ Crossflow, hot water being forced into
cold water pipe, or vice versa, when
mixer is closed
⁄ Backflow preventers dirty or leaking ⁄ Clean backflow preventers, exchange
if necessary
⁄ Spout temperature does not corre-
spond with temperature set
⁄ Thermostat has not been adjusted ⁄ Adjust thermostat
⁄ Hot water temperature too low ⁄ Increase hot water temperature to
42 ºC to 65 ºC
⁄ Temperature regulation not possible ⁄ Temperature regulator dirty or calcified ⁄ Clean temperature regulator, ex-
change if necessary
⁄ For new installations: basic body incor-
rectly connected (should be: cold
right, hot left) or installed with 180º
rotation
⁄ Install function block turned through
180º
⁄ Safety stop button not operating ⁄ Spring defective
⁄ Button calcified ⁄ Clean spring and⁄or button, exchange
if necessary
S P A R E P A R T S
(see page 69)
XXX = Colors
000 = chrome plated
090 = chrome plated⁄gold plated
820 = brushed nickel
930 = Polished Brass
S P E C I A L I N F O R M A T I O N F O R U K
(see page 74)
T E S T C E R T I F I C A T E (see page 80)