4
StrikeLight 2 Stun Flashlight User Manual
Chapter 2: Introduction
Top view of the StrikeLight 2 stun flashlight.
Safety Switch
The safety switch is used to determine whether the StrikeLight 2 stun flashlight can arc. With the
safety switch in the rearward (SAFE) position, the stun flashlight will not arc. When the safety switch is
in the forward (ARMED) position, the stun flashlight can arc when the trigger button is pressed.
ARMED Status LED
When the safety switch is in the forward (ARMED) position, the electrodes are placed in standby status.
The device can arc when the trigger button is pressed. Also, when the safety switch is shifted forward
the ARMED status LED will be uncovered and light up .
Trigger Button
After arming the stun flashlight, press and hold the trigger button to make electricity arc at the
electrodes on the front of the device. Press and hold the trigger button when applying a contact stun
to an attacker. The device will arc continually until you release the trigger button or the battery
depletes, whichever comes first.
.
Safety switch
Flashlight button
rearward (SAFE)
forward (ARMED)
