5.2.
Replacing the CF Card Holder (Optional)
a. Loosen the thumb screws (2) to
remove the front side stand cover.
b. Disconnect the IDE cable and remove
the screws(3) to replace the CF card
holder.
5.3.
Replacing Mainboard & I/O Board
To replace Main Board and I/O Board, please follow the steps in chapter 5.1(a)(b)
a. Unhook the clips
b. Disconnect the cables (5). IDE, LVDS,
Inverter cable, touch cable, VFD cable
c. Remove the screw (4), 2 on each side,
from the base
d. Lift the stand cover up to separate it from
the stand base
25
Summary of Contents for POS3600 Series
Page 1: ...User Manual June 2008 Revision 1 2b Point of Sale Hardware System ...
Page 9: ...2 3 Rear View Rear I O 2 4 Bottom View Rubber Foot VESA mounting holes 9 ...
Page 12: ...e Click the Finish button and restart your system 12 ...
Page 20: ...c Click the OK button and restart your system 20 ...
