manualshive.com logo in svg

Axon P900 Series, Manual

Share
Download
Axon P900 Series Manual Download Page 45

-45-

 

5-4. Jumper setting 

 

Do not move the jumper with the power on.   

Always turn off the power and unplug the power cord from the computer before changing a jumper setting.   
Otherwise, the board could be damaged. 

 
The jumper determines the BIOS Setup program’s mode.   
Normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the 
microcode version in the BIOS and reports if the two match. 

 
 
 
 

Function/ 

Mod 

Jumper Setting 

Configuration 

Normal 

3 

2 

1 

1-2 

The BIOS uses current configuration 
information and passwords for booting. 

Configure 

3 

2 

1 

2-3 

After the POST runs, Setup runs automatically.   
The maintenance menu is displayed. 

Recovery 

3 

2 

1 

None 

The BIOS attempts to recover the BIOS 
configuration.   
See Section 3.7 for more information on BIOS 
recovery. 

Summary of Contents for P900 Series







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands