17
3-6 Batch data mode
Disable-
Do not batch data. The handheld unit attempts to transmit every scanned barcode. If the
transmission is failed, the barcode data is ignored.
Out-of-range batch
－
The handheld unit starts storing barcode data when it loses its connection to a
remote device (for example, when a user holding the handheld unit walks out of range). Data
transmission is triggered by reestablishing the connection with the cradle (for example, when a user
holding the handheld unit walks back into range).
Standard batch-
The handheld unit starts storing barcode data after %%%EBM
” (
Enter Batch Mode
)
is scanned. Data transmission is triggered by scanning
“%%%SBD” (
Send Batch Data
).
If you want to output the total number of barcodes scanned when in Standard batch Mode,
scan
“%%%BDN”.
If you want to clear the stored data
in the handheld terminal, please scan “%%%CBD”.
In Out-of-range batch or Standard batch modes, calculate the number of barcodes the handheld unit
can store as follows:
Number of storable barcodes = 163840 bytes of memory / (number of characters in the b 14+1).
Summary of Contents for MICRELEC CS2600-BT
