Axon Fleet 3 Wireless Microphone
Installation and User Manual
Axon Enterprise, Inc.
Page 14 of 23
Wireless Microphone Operation
Before using an Axon Fleet 3 wireless microphone, ensure it is fully charged and configured.
Pairing a Wireless Microphone with the Charging Base
Insert the Wireless Microphone into the Charging Base. This will pair the two until a new
Microphone is inserted (except during recording).
Operating Modes
The Axon Fleet 3 wireless microphone has two operating modes:
•
BUFFERING (turning on the wireless microphone and starting pre-event buffering)
•
EVENT (event recording)
BUFFERING Mode (turning on the wireless microphone)
•
Move the Power Switch on the wireless microphone to the ON position.
The wireless microphone conducts start-up checks and syncs mode indications with the
front camera. When the front camera begins BUFFERING, the Operation LED on the
wireless microphone will blink green.
EVENT Mode
•
When you need to record, quickly double-press the EVENT button on the wireless
microphone.
The moment you double-press the EVENT button, both video and audio will be recorded.
This will continue throughout the duration of the recording until you terminate the
recording.
Recording can also be started using Axon View XL, momentarily pressing the EVENT
button on Axon Fleet 3 front camera, or when the Axon Signal Vehicle unit sends a signal.
The wireless microphone provides you with indications that it is recording in EVENT
mode:
•
At the start of an event and every 2 minutes during an event, the wireless
microphone beeps twice.
