4
Axon Fleet camera system with mount, and Axon Fleet power unit
Read and follow all instructions included with the Axon Fleet products, accessories,
and parts, including any supplemental instructions.
Failure to follow the instructions in this manual or as provided with any Axon Fleet
products, accessories or parts may result in Axon Fleet or Axon Signal not working
properly or cause damage to the to the products or the vehicle. Save all instructions.
The technician who installs the Axon Fleet components and the Axon Signal Vehicle
unit must be qualified to work with automotive electronics.
When installing Axon Fleet and the Axon Signal Vehicle unit, ensure that drilling will
not damage the emergency vehicle's equipment or surface. Remove all burrs and
debris after drilling.
Ensure there is a good electrical ground to the vehicle chassis.
Do not install Axon Fleet components or the Axon Signal Vehicle unit anywhere that
will interfere with airbag deployment.
Do not install any part of the Axon Fleet system or the Axon Signal Vehicle unit in the
vehicle's engine compartment.
Do not install any part of the Axon Fleet system or the Axon Signal Vehicle unit on the
exterior of the vehicle.
The Axon Fleet system and Axon Signal Vehicle unit are not waterproof.
Additional Reading
This manual explains how to install the Axon Fleet camera hardware. Other manuals
cover additional aspects of the Axon Fleet system. These documents are available at
•
The
Axon Fleet Camera System User Manual
provides instructions for recording with
the camera.
•
The
Axon Signal Vehicle Installation Manual
provides instructions for installing an
Axon Signal Vehicle unit in a vehicle.
•
The
Axon View XL User Guide
provides instructions for using the Axon View XL
program.
