07
Axminster Clubman Chucks...
www.axminster.co.uk
This is the familiar Woodturner’s Chuck but now with a new name and a flashy new livery of nickel
plated body and mounting jaws. There is a practical reason for the plating, not just to improve the
appearance but to give greater protection against corrosion. Hard though it may be to understand,
some woodturners allow their precious equipment to languish in a damp workshop and gather rust.
The other change, not quite so obvious at first glance, is that on the majority of the new chucks the
mounting thread will be machined directly into the body of the chuck and not into a loose insert as has
been the case until recently. Our experience dictates that we will produce the K10 Clubman Chuck with
two integral threads, 3/4" x 16tpi & 1" x 8tpi. This will have no effect on the operation of the chuck but
will make life easier for our production department and will help to hold
costs down. The less common threads will be available as before by
specifying the appropriate threaded insert. (A comprehensive list of
threaded inserts and their relevant
stock codes is printed in the
woodturning section of
our catalogue).
Chuck Key
AXMINSTER
CLUBMAN K10 100mm
Technical Specifications
Overall diameter:
100mm
Overall length of chuck body:
60mm
Weight:
2 kg
Order no: 211302
T01 3/4" x 16tpi
Order no: 211303
T04M 1" x 8tpi
Order no: 211304
T38 M33 x 3.5mm
Order no: 211305
T02RL 1.1/2" x 6tpi
Order no: 211397
T03 1" x 12tpi
Order no: 211398
T23 1.1/4" x 8tpi
Order no: 340017
Long Key-Clubman
(Optional Accessory)
