Axminster TSCE-12R, Instruction Manual

Page: 18 / 48

Mounting Rip Fence Support Bracket
Adjust the rip fence support Bracket flush with
the Table by turning four set screw A
(Figure.9) and using a straight edge.
Check the water level once again after
tightening B (Figure. 9) two hex cap screw.
B
A
Figure. 9
Figure 10
Figure 11
Emergency Foot Operated Stop Switch
This switch ( Figure 10.) is provided for use in
emergency situation only, do not
remove that it is used in lieu of the mushroom
headed lock-off stop switch on the front of the
switch box.
The Rear Extension Table
If an assistant is employed at the
rear of the machine to remove cut piece the Table
(Figure11.) Should be extended to the distance
between the saw blade spindle and the rear edge
of the table is at least 1200mm. The assistant
should always remain at the outfeed end of the
extension table and should not lean forward and
put his hand near to the Saw teeth.
- 18 -