Axminster TSCE-12R, Instruction Manual

Page: 11 / 48

Shipping Contents
Unpacking
Remove box and wood crating completely from around saw. Check for shipping
damage immediately to your distributor and shipping agent. Do not discard any
shipping material until the Table Saw is assembled and running properly.
Compare the contents of your container with the parts lists in the next two pages to
make sure all parts are intact. Missing parts, if any, should be reported to your
distributor. Read the instruction manual thoroughly for assembly, maintenance and
safety instructions.
1. Unbolt the saw from the skid.
2. Carefully slide the saw from the pallet onto the floor.
Do not connect the tablesaw to the power source until all assembly has been
completed! Failure to comply may cause serious injury!
The Table Saw should be placed in an area with a sturdy level floor, good ventilation
and sufficient lighting. Leave enough space around the machine for mounting
extension wings and rail assemblies, and loading and off-loading stock and general
maintenance work.
Cleaning
Expose metal surfaces, such as the table top and extension wings, have been given a
protective coating at the factory. This should be remove with a soft cloth moistened
with kerosene. Do not use acetone, gasoline, or lacquer thinner for this purpose. Do
not use solvents on plastic parts, and do not use an abrasive pad because it may
scratch the surfaces.
Transporting and handling
The machine shall be moved by persons who are qualified.
Persons besides the worker are not allowed to stay in the work place during
transporting the machine.
a) Please refer to instruction manual in specifications and machine weight to arrange
handling equipment. Be sure to use capable fork-lifter referring to lift of machine.
b) Forklift can be used in handling and shall be operated by qualified driver.
c) Before handling, make sure all moveable parts are secured in their position and all
moveable accessories should be removed from machine.
d) Make sure that the strength of forklift is sufficient to handle machine.
e) During handling, people are strictly prohibited
f r o m e n t e r i n g i n t o t h e p a t h o f m a c h i n e
movement.
f) While transportation, keep attention to the
balance of machine.
g) About forklift position of machine, please refer
following diagram. The fork length shall be ≧ 2/3
machine depth.
- 11 -