Axminster CQ6230A-2/910, User Manual

Page: 17 / 69

OWNER’S MANUAL
Page - 16 -
RECOMMENDED LUBRICANTS
For normal and other climatic conditions Form 2
Assembly
Lubricating
point
Lubricating
method
Lubricant Lubricating interval
Headstock
Gears and
bearings.
Spindle front
bearing.
Spindle rear
bearing. Belt
pulley bearing
Oil
bath—by
splashing
Machine oil
Oil replacement: --for
the first time—after 10
days operation of the
lathe—for the second
time—after 20 days
operation of the
lathe—next time—once
per each 60 days
Feed box
Gears, bearing
and all the
mechanisms
Oil
bath—by
splashing
Machine oil
Carriage
Gears, bearing
and all the
mechanisms
Oil
bath—by
splashing
Machine oil
Quadrant
Changes
gears
Quadrant idle
axle
By hand
Machine oil
Grease “L”
Once per shift
Once per shift
Carriage
slide
Corp bed ways
Slide bed
ways
By hand
with help of
oilers
Machine oil Once per shift
Cross
carriage
Support of the
screw in the
slide.
Cross screw
for carriage
By hand oil
tank,
located in
the
carriage
Machine oil Once per shift
Cross-shap
ed carriage
Carriage bed
ways.
Cross-shaped
carriage bed
ways. Screw
of the
cross-shaped
carriage.
Tool-holder
By hand Machine oil Once per shift
Tailstock
Screw support
quill
By hand Machine oil Once per shift
Console
Lead screw
bearing
Feed rod
bearing
Switch rod
bearing
By hand Machine oil Once per shift