Axminster AWHBS250N, User Manual

Page: 12 / 32

12
W H I T E
A X M I N S T E R
W
Specification...
Table Size: 340 x 340mm
Table Tilt: minus 5 to + 45˚ degrees
Table Height on Bench: 370mm
Table Height on Stand: 990mm
Dust Extraction Outlet: 63mm
Overal Size L x W x H: 420 x 410 x 1500mm
Noise Level <80db (A)
Weight 43.5 kg
Please read the Instruction Manual prior to using your new machine; as well as the operating
procedures for your new machine, there are numerous hints and tips to help you to use the machine
safely and to maintain its efficiency and prolong its life. Keep this Instruction Manual readily
accessible for any others who may also be required to use the machine.
Please read though the section entitled Identification and Description of parts of the Saw, as this will
ensure that you will understand our references during the assembly and setting up phases.
Identification and Parts Description...
Main saw frame The main body of the machine that all the other parts are mounted
upon.
Upper and lower The two doors that cover the upper and lower saw wheel compartments.
cover doors There are interlocks fitted to both doors so that the machine can not
operate if either door is left open.
Upper saw The upper saw wheel is mounted on double bearings on an axle that is
wheel mounted to a tilting plate. (To provide the fore and aft tilt movement that
controls the blade tracking). The tilting plate is hinged to a yoke. The
extended ends of the hinge pin also act as guides in slots in a bracket
mounted in the rear of the upper saw wheel compartment.
Axminster No. AWHBS250N (211532)
Motor 240V a.c. 50Hz, 1400 rpm. 370W
Wheel Diameter 254mm
Blade Speed (double speed) 660/960 M/min
Max Cutting Depth: 120mm
Max Cutting Width: 245mm
Max Cutting Width with Fence: 145mm
Blade Length: 1790mm
Blade Width: 6mm (1/4") to 13mm (1/2")