Axminster AWEBDS46 MkII, User Manual

Page: 12 / 28

12
Assembly
Fitting the Fence Assembly
Fig 11
Fig 12
Swivel mandrel clench bolt
Note: You will require a 14mm A/F spanner
To fit the fence assembly requires that you remove the linishing belt to gain access.
PLEASE NOTE: the workstop plate has been removed for clarity
Before starting you will need to tilt the linisher assembly into the vertical position, to do this
slacken off the swivel mandrel clench bolt which is located near the drive belt cover, raise
the linisher and then re-tighten the bolt to prevent it from coming down. (See figs 11 & 12)
DISCONNECT THE MACHINE FROM THE MAINS SUPPLY
!
Locate the work stop plate for the linisher, and fit to
the chassis using the M6 bolt, shake proof washer
and M6 washer. (See fig 16).
Fig 10
Fitting the workstop plate