Maintenance
09
Fig 5
Fig 6
Fig 7
Fig 8
Daily:
Drain water from tank. (See fig 5)
Weekly:
Check oil level and top-up if necessary. (See fig 6)
Monthly:
Un-clip and remove the air inlet filter outer casing and
clean the filter element with the following: (See fig 7)
(a)
Compressed air
(b)
Wash in soapy water and left to dry.
Do not
use the compressor without the air filter fitted.
Six Monthly:
Change the oil. With the oil still warm remove the oil
filler plug, place a suitable container under the drain
plug and drain the oil right out. (See fig 8) Replace drain
plug and refill to the level mark on the sight glass.
Yearly:
(a)
Replace the air filter element.
(b)
Check and clean the air intake and delivery valves.
(c)
Check the non return - valve and replace the seal
between the crankcase and cover if necessary.
When components are removed for servicing, take the
opportunity to fit new seals.
Note: (b)
and
(c)
should be undertaken by a competent
service engineer.
Summary of Contents for AWC20HP
Page 10: ...Parts Breakdown 10 ...
Page 11: ...Parts List 11 ...
