Axminster 211925, User Manual

Page: 19 / 28

OWNER’MANUAL OF SL700C/SLP600C
18
the speed will not be stable. Change the filter promptly.
■ ■ ■ ■
Spark plug
Spark plug is easily have carbon deposit, after
operating for twenty-five hours, remove it, and
clean the electrodes with a steel wire brush. The
suitable electrode clearance of the spark plug is
0.6
～
0.7mm.
■ ■ ■ ■
Gear case
After operating for twenty hours, you need to add grease to the gear
case .Please use a grease gun on the nipple provided.
■ ■ ■ ■
Blade
Every time working for 1
～
2 hours, you should add grease to the
blade.
To sharpen the blade
1. Start the engine, keep the blade with low
speed, move the blade for 2mm, and stop
the engine.
2. To sharpen the blade use a suitable small flat
file or dressing stone and address the
exposed blade edge.
3. Start the engine again
，
stagger the blade for
2mm, then stop it . Address the newly
exposed blades as before.
4. Repeat as required.
5. Start the engine, align the blades and address the top of the blades.
■ ■ ■ ■
Muffler
After operating for fifty hours, please remove the muffler, clear the
inner carbon deposit with screw driver, at the same time clean the
carbon of the outlet pipe. Fasten every screw securely.