Operating Instructions/ Optional Accessories
26
Spindle at +05˚ degrees
3
+05˚
Setting Spindle at 45˚ (degrees)
1
Spindle at 45˚ degrees
2
45˚
Optional Accessories
The spindle moulder can be fitted with the following optional
accessories:
Extension Table Assembly Code: 950505
This accessory is a support table complete with a telescopic
support arm. It clamps to the sliding table to provide extra
support when machining panels or the ends of long
boards, see fig 65.
• Provides support for panels and long boards
• Easy to fit and can be removed for storage when not required
• Supplied with a long fence with a length stop
Tenon Plate Code: 950506
This accessory is a simple alloy plate that lifts the work piece
above the table. This means that you can machine the top and
bottom surface of the work, such as when creating a tenon. It
can be mounted next to the mitre fence and clamp so as to
make the machining of end grain material as safe as possible.
Overall length 650mm x 120mm width, see fig 66.
• Special tenon plate to allow machining to the top
and bottom of the work piece
• Allows up to 200mm diameter tooling to be used
• Easy and safe to use, clamps next to the mitre fence
Fig 65
Fig 66
