AXMINSTER TOOLS 107824, Original Instructions Manual

Page: 8 / 16

SPECIFICATION
8
SETTING UP THE GRINDER
Place the grinder on a flat level surface. There are two
machined slots to either side of the grinder housing to
bolt the machine onto a work bench if required, see
fig 01.
Adjust the two tool rests leaving a gap of approximately
1.5mm clearance between the grinding stone and the
tool rest, see fig 02
Fig 01
NOTE: ADJUST THE TOOL
RESTS AS THE GRINDING
STONE WEARS DOWN.
Fig 02
2mm
clearance
Code 107824
Model AW1502WSG
Power
250W 50Hz 230V 1Ph
Duty Cycle S1 180W
Wheel Width 20 mm & 40 mm
Grit 20mm 60 grit & 40mm 80 grit
Wheel Diameter 150 mm
Shaft Diameter 12.7 mm (1/2")
Overall L x W x H 310 mm x 270 mm x 215 mm
Weight 9.8 kg