Changing the Blade
14
DISCONNECT THE SCROLL SAW
FROM THE MAINS BEFORE
CONTINUING!
1. Turn the blade tensioning knob anti-clockwise to release
tension on the blade and remove the table insert, see fig 21-22.
Fig 21-22
2. Beneath the table there is an elongated access slot machined
into the side access panel, see fig 23. Using the supplied handle
Hex key (D) insert the key through the slot and loosen the lower
blade holder caphead screw, see fig 24-25.
Fig 23-24-25
3. Repeat for the upper blade holder, see fig 26 and remove
the blade, see fig 27.
NOTE: The blade can be removed from the lower blade
holder without removing the side access panel but figure
28 shows a detail picture for clarity.
Fig 26-27-28
Standard Pin Blades
Machined slot
D
lower blade holder
Upper blade holder
Cradle recess
Blade pins
