Specification
5
Code
104792
Model
AC355WL
Rating
Craft
Power
750W 230V 50Hz 1ph
Speed
250-3,550rpm
Spindle Thread
T38 M33 x 3.5mm
Taper Tailstock
2MT
Distance Between Centres
510mm
Max Diameter over Bed
355mm
Tool Rest Stem Diameter
25.4mm
Overall L x W x H
1,040mm x 370mm x 480mm
Weight
57kgs
Assembly
The machine and its accessories will arrive coated with
corrosion preventative grease. This will need to be cleaned
from the machine, its components and accessories prior to it
being set up. Use proprietary de greaser. Wear overalls, coverall
and eye protection before cleaning.
95% of the machine comes fully assembled, all that remains is
to fit the four prong drive centre (F) and the 60˚ live centre (G)
and tool rest (B).
1. Locate the four prong drive centre (F) and live centre (G).
Remove the faceplate (C) by loosening the two grub screws
and using the spanner (D), unscrew the faceplate from the
spindle left handed thread and place aside, see fig 01-02-03.
Fig 01-02-03
2. Insert the drive centre (F) into the spindle and repeat for
the live centre (G) into the tailstock barrel, see fig 04-05.
Fig 04-05
Grub screws
Hex key
F
G
D
C
Continues over...
