10
Setting Up
Fig 23.
Fig 24.
Fig 25.
Fig 26.
d
c
With the cover (d) removed, turn the tracking knob (e)
clockwise to track the belt to the right or anti-clockwise
for left, until the belt is tracking evenly (See figs 25-26).
Replace the cover (d) as described above but in reverse.
NOTE: DO NOT TURN THE
TRACKING KNOB TOO
AGGRESSIVELY, THE ADJUSTMENT
ONLY NEEDS TO BE VERY SLIGHT.
Adjusting the Platen
The Platen (f) should be adjusted so that it almost touches the back of the abrasive belt. If it requires adjustment loosen
the two caphead screws (g) that secure it to the frame and adjust until correct. Re-tighten the screws (See figs 27-28).
Your belt and disc sander is now ready. Check that all fixings are secure before operating the machine.
f
g
Loosen the platen (F) and adjust it unit it almost touches
the back of the belt
Loosen the two caphead screws (g) to adjust the platen
Fig 27.
Fig 28.
Summary of Contents for AC125BDS
Page 16: ...16 Exploded Diagrams Lists ...
Page 17: ...17 Exploded Diagrams Lists ...
Page 19: ...19 Wiring Diagram ...