5
The Axkid Modukid Base can be adjusted to provide more leg space for the child or to provide more
space for the driver or passenger seat in your vehicle. This is done by adjusting the ISOFIX arms and
the front brace.
The ISOFIX arms (F) can be adjusted to different lengths to accommodate different seating
positions. There are 4 positions, P1-P4. The ISOFIX arms (F) are adjusted by pulling the ISOFIX
knob (I)
The ISOFIX arms (F) locks to the ISOFIX connection points in the vehicle. The ISOFIX arms
can be released from the vehicle connection points by pushing the ISOFIX release button (H).
The ISOFIX installation indicator (G) turns green when there is a secure connection between
ISOFIX arm and ISOFIX connection point.
The front brace (A) is not installed on the base at delivery so it shall be inserted into the base.
The Axkid Modukid Base may not be used without the front bracee. The front brace can
be adjusted to different positions to accommodate different seating positions. There are 6
positions, P1-P6. The front brace (A) is released by pulling the front brace release knob (B).
Make sure that the front brace release knob (B) clicks into position after adjusting the front brace
The support leg (M) can be folded into a parking position underneath the base. This position of
the support leg should only be used during storage, never when installed in a vehicle. When the
support leg is unfolded the support leg installation buzzer (O) will start beeping. The beeping
will stop after correct installation is completed.
If no sound is emitted from the support leg installation buzzer (O) when the support leg is
folded out, check the battery. The battery is checked by unscrewing the two screws under the
support leg foot (N) and removing the cover. The battery is then accessible. Note that you can
only replace the battery with a CR1632 size battery.
By pulling the seat release handle (E), the attachment hooks (C) will open and enable
attachment or detachment of an Axkid Modukid Infant or Axkid Modukid Seat.
The attachment hooks (C) lock an Axkid Modukid Infant or Axkid Modukid Seat to the base.
WARNING:
Never use the Axkid Modukid Base without installing the front brace.
Functions of the Axkid Modukid Base
F1
F2
F3
F4
F5
F6
F7
