Important information
To maximize your child’s safety, it is important that you keep the following in mind:
•
Do not use your phone while driving. Axkid recommends to safely park your car
before visually checking your phone.
•
Never try to remove any clothing from your child while driving. This may affect the
restraining of your child and may seriously affect the safety of your child.
•
Please check that Axkid Connect is paired with your phone and is working
correctly.
•
Before using Axkid Connect, make sure that no components are damaged.
•
Do not charge Axkid Connect while your child is seated in your car seat.
•
Make sure that Axkid Connect is not folded before you install and restrain your
child.
•
Do not attempt to disassemble nor modify any part.
•
Never use Axkid Connect without the textile cover.
•
If you are using an iOS device, make sure you have location service enabled to be
able to use Bluetooth.
When Axkid Connect should no longer be used, remove the outer textile cover (A) and
recycle the foam pad (B) according to your local legislation and recommendations. Note
that the foam pad (B) contains battery and electronics.
BATTERY WARNINGS
Do not immerse Axkid Connect in water or any other liquid. Never try to open housing
(C) and do not expose the housing to excessive force, eg punching, stamping or
bending. Keep Axkid Connect away from any sources of heat to prevent overheating,
like stoves, heaters and cookers also avoid direct sunlight and vehicle in extremely hot
conditions. Do not short-circuit the power terminals.
EN
