28
SECTION 5 -
WEB Application: Configuration
To access configuration pages, in the browser enter either the NetBIOS name or IP address with a config
extension. i.e.
http://192.168.100.24/config
There are 5 configurations pages and a Log page that may be selected.
Device Configuration Page
The Device Configuration page provides
Device information:
•
Model
•
Unit ID
•
Manufacture Date
•
Installed Firmware Version
•
Temperature of amplifier heatsink
•
IP address
•
MAC address.
•
Amplifiers assigned Network name
Wired Ethernet:
The Network configuration is DHCP by
default. A Static IP address may be selected;
IP settings will appear in a drop-down.
Date & Time:
Configure the NTP server and if/when
Daylight Saving time is observed.
If settings have been changed they do not
take effect until ‘Save Changes’ button has
been selected.
Sources Configuration Page
This allows you to rename the audio Sources
on the amplifier – the names will appear on
connected keypads and Tablets or Mobiles
running the Axium Application.
Source names have a maximum of 15
characters (less when using exotic
characters).
The gain of each analog source may also be
adjusted using the Left/right buttons.
These changes happen live.
If settings have been changed, they must be
Saved using the “Save Changes’ button for
the changes to be permanent.
