24
SECTION 4 -
Menu Navigation: System
Network settings Page
Network setting always defaults to DHCP.
The connected Ethernet router’s allocated
IP address can be viewed.
If for some reason a Static IP is required the
selection can be made, and settings adjusted
using the back and forward arrow and plus minus
keys.
Select the Back arrow to return to the System
settings Page.
Presets Page
There are 14 possible presets.
It is easier to set up the presets using a
connected PC running the Axium Design Portal
program. However Presets can be setup using
the Menu navigation.
The first 8 presets are accessible on the opening
page. To access the remaining presets select the
‘More’ button
Select the Back arrow to return to the System
settings Page.
Presets 9 – 14 and the Page Preset may be
accessed.
Selecting ‘More’ returns to the previous page
displaying Presets 1 – 8.
‘Clear Alarms’ turns off all alarm settings.
These can only be re-enabled by resetting the
alarms in the preset.
Select the Back arrow to return to the System
settings Page.
