Axis XP40-Q1765 User Manual Download Page 57

Page: 57 / 59

XP40-Q1765 Explosion-Protected PTZ Network Camera

Technical specifications

You can find the latest version of the datasheet at

www.axis.com

LED Indicators

Note

• The Status LED can be configured to be unlit during normal operation. To configure, go to

Setup > System Options > Ports

& Devices > LED

. See the online help for more information.

• The Status LED can be configured to flash while an event is active.

• The Status LED can be configured to flash for identifying the unit. Go to

Setup > System Options > Maintenance

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

Red

Firmware upgrade failure.

Note

The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to

Setup > System

Options > Ports & Devices > LED

. See the online help for more information.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or

unmount the SD card from the Axis product’s webpages before removal.

This product supports microSD/microSDHC/microSDXC cards (not included).

For SD card recommendations, see

www.axis.com

Buttons

Control Button

For location of the control button, see

Hardware overview on page 7

The control button is used for:

•

Resetting the product to factory default settings. See

page 52

•

Connecting to an AXIS Video Hosting System service. See

page 44

. To connect, press and hold the button for about 3

seconds until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 44

. To connect, press and hold the button for about 3 seconds.

Summary of Contents for XP40-Q1765




























































Search results

Summary of Contents for XP40-Q1765

Reviews:

Related manuals for XP40-Q1765

Brands by name

Popular brands

Axis XP40-Q1765, User Manual

Search results

Summary of Contents for XP40-Q1765

Reviews:

Related manuals for XP40-Q1765

Brands by name

Popular brands