Axis T99A11, Installation Manual

Page: 26 / 212

AXIS T99A11 Positioning Unit 24 V AC/DC
Install the network link
You have different options for installing the network link:
• A: via an optical fiber or RJ45 cable connected to the SFP module (with a respective
connector) in the SFP slot.
• B: via an RJ45 cable connected to the fixed RJ45 connector.
• C: via both of the above, in which case connection via the SFP module functions as the
primary network link and connection via the fixed RJ45 connector as the fail-over link.
For more information on network connector locations, see Connectors on page 34 .
Note
• SFP module is not included. For more information on available SFP modules, see
www.axis.com
• Establishing a network link only via the optical fiber cable using the respective SFP module
works as a stand-alone solution for long range cabling installations.
26