Axis T93E05 User Manual Download Page 2

Legal Considerations

Video and audio surveillance can be prohibited by laws 

that vary from country to country. Check the laws in 

your local region before using this product for 

surveillance purposes.

Trademark Acknowledgments

Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux, 

Microsoft, Mozilla, Netscape Navigator, OS/2, Real, 

SMPTE, QuickTime, UNIX, Windows, WWW are 

registered trademarks of the respective holders. Java 

and all Java-based trademarks and logos are trademarks 

or registered trademarks of Sun Microsystems, Inc. in 

the United States and other countries. Axis 

Communications AB is independent of Sun 

Microsystems Inc. UPnP™ is a certification mark of the 

UPnP™ Implementers Corporation.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there is 

no guarantee that interference will not occur in a 

particular installation.

If this equipment does cause harmful interference to 

radio or television reception, which can be determined 

by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or 

more of the following measures: Re-orient or relocate 

the receiving antenna. Increase the separation between 

the equipment and receiver. Connect the equipment to 

an outlet on a different circuit to the receiver. Consult 

your dealer or an experienced radio/TV technician for 

help. Shielded (STP) network cables must be used with 

this unit to ensure compliance with EMC standards. 

USA - 

This equipment has been tested and found to 

comply with the limits for a Class B computing device 

pursuant to Subpart B of Part 15 of FCC rules, which are 

designed to provide reasonable protection against such 

interference when operated in a commercial 

environment. Operation of this equipment in a 

residential area is likely to cause interference, in which 

case the user at his/her own expense will be required to 

take whatever measures may be required to correct the 

interference. 

Canada - 

This Class B digital apparatus complies with 

Canadian ICES-003.

Europe - 

 

This digital equipment fulfills the 

requirements for RF emission according to limit B of 

EN 55022. This product fulfills the requirements for 

immunity according to EN 61000-6-1 residential, 

commercial and light-industry environments and 

EN 55024.

Japan - 

This is a class B product based on the standard 

of the Voluntary Control Council for Interference from 

Information Technology Equipment (VCCI). If this is used 

near a radio or television receiver in a domestic 

environment, it may cause radio interference. Install and 

use the equipment according to the instruction manual. 

Australia - 

This electronic device meets the 

requirements of the Radio communications 

(Electromagnetic Compatibility) Standard AS/NZS 

CISPR22:2002.

Korea - 

As an electromagnetic wave equipment

for office use (Class A), this equipment is

intended to use in other than home area. Sellers

or users need to take note of this.

Safety

Complies to EN 60950-22 (IEC 60950-22), Safety of 

Information Technology Equipment.

Equipment Modifications

This equipment must be installed and used in strict 

accordance with the instructions given in the user 

documentation. This equipment contains no 

user-serviceable components. Unauthorized equipment 

changes or modifications will invalidate all applicable 

regulatory certifications and approvals.

Liability

Every care has been taken in the preparation of this 

document. Please inform your local Axis office of any 

inaccuracies or omissions. Axis Communications AB 

cannot be held responsible for any technical or 

typographical errors and reserves the right to make 

changes to the product and documentation without 

prior notice. Axis Communications AB makes no 

warranty of any kind with regard to the material 

contained within this document, including, but not 

limited to, the implied warranties of merchantability 

and fitness for a particular purpose. Axis 

Communications AB shall not be liable nor responsible 

for incidental or consequential damages in connection 

with the furnishing, performance or use of this material. 

This product is only to be used for its intended purpose.

RoHS

This product complies with both the European 

RoHS directive, 2002/95/EC, and the Chinese 

RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a Directive 

2002/96/EC on Waste Electrical and Electronic 

Equipment (WEEE Directive). This directive is 

applicable in the European Union member 

states. The WEEE marking on this product (see right) or 

its documentation indicates that the product must not 

be disposed of together with household waste. To 

prevent possible harm to human health and/or the 

environment, the product must be disposed of in an 

approved and environmentally safe recycling process. 

For further information on how to dispose of this 

product correctly, contact the product supplier, or the 

local authority responsible for waste disposal in your 

area. Business users should contact the product supplier 

for information on how to dispose of this product 

correctly. This product should not be mixed with other 

commercial waste.

Support

Should you require any technical assistance, please 

contact your Axis reseller. If your questions cannot be 

answered immediately, your reseller will forward your 

queries through the appropriate channels to ensure a 

rapid response. If you are connected to the Internet, you 

can:

• download user documentation and firmware updates

• find answers to resolved problems in the FAQ database. 

Search by product, category, or phrases

• report problems to Axis support by logging in to your 

private support area

Summary of Contents for T93E05















































Reviews: