
AXIS T92A00 Installation Guide
Page 5
ENG
LISH
Install the bracket
Install the mount for AXIS T92A00 on a wall ceiling or pole and make sure that the screws and
plugs are appropriate for the material (e.g. wood, metal, sheet rock, stone). Check if the wall bracket
has
an internal cable channel or
if the cabling is external. Select the corresponding
description below and install the wall bracket in the intended position.
Alt
Wall bracket with internal cable channel
1. Install the wall bracket/holder on a wall, ceiling or pole using the appropriate screws for the
weight of the housing and the material.
2. Attach the rubber gasket and make holes for the cables.
3. Pull a sufficient length of the cables through for the housing and camera (approximately
50cm).
4. Proceed to
“Install the camera in the housing”
on page 6.
Alt
Wall bracket with external cabling
1. Install the cables and wall bracket/holder on a wall, ceiling or pole. To comply with the
IP66-rated design of AXIS T92A10, it is necessary to use appropriate conduits to protect the
cables.
2. Proceed to
“Install the camera in the housing”
on page 6.
Note:
Please visit the Axis web site at www.axis.com for a comprehensive list of available brackets and
accessories.
2
A
B
A
cables
cables
Wall bracket (internal cable channel)
Wall bracket (external cabling)
rubber gasket
cables
A
B
B