Axis Spin |1| English
Axis Spin |1| English
4. Gently stretch the skin of your face with your free
hand while moving the shaver slowly and smoothly
against the grain of your beard. Hold the shaver at
a 90° angle to your face while maintaining contact
with the floating heads.
5. To shave the chin area, gently pull the skin up-
ward and slide the shaver in an easy upward motion.
To avoid damaging the floating heads, press lightly,
not too hard.
6. Turn shaver off and replace protective head
guard.
amount of shaven hairs under the head and clean
the entire head assembly when necessary, your
shaver will always run at peak performance.
1. Remove the protective plastic head guard.
2. Ensure that the floating heads and inner cutter
assembly are not damaged. Replace damaged parts
before using. To obtain replacement parts, refer to
the “Ordering Replacement Parts” section of this
manual.
3. To turn shaver on, slikd the On/Off switch up to
the “on” position.
