AXIS Q7436 Video Encoder Blade
PTZ (Pan Tilt Zoom)
3. Enter a descriptive name.
4. Specify the pause length between runs.
5. Click
to start recording the Pan/Tilt/Zoom movements.
6. When satisfied, click
.
7. Click
OK
.
Note
Only the name of the recorded tour and pause between runs can be modified. Starting a new recording will overwrite the
existing guard tour.
The recorded tour can be activated from the Live View and Guard Tour pages or through events. For more information see the
online help
.
Advanced
Controls
Advanced PTZ settings can be configured under
PTZ > Advanced > Controls
.
The
Panel Shortcut Command Buttons
list shows the user-defined buttons that can be accessed from the Live View page’s
Ctrl
panel
. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.
Click
Add
to add a new shortcut command button.
The following PTZ controls are enabled by default:
•
Pan control
•
Tilt control
•
Zoom control
To disable specific controls, deselect the options under
Enable/Disable controls
.
Install PTZ Driver
This Axis product supports several PTZ devices. Please see
www.axis.com
for a complete list of supported devices, and to obtain the
correct driver. To install a PTZ device you need to install the PTZ driver.
To install the PTZ driver go to
PTZ
>
Driver Selection
.
Browse
to find the driver (e.g. driver.ptz) and
Upload
. If the driver was
successfully uploaded, it appears in the
Select driver to use
drop-down list. From this drop-down list, select the driver to install
or remove, and click
Save
.
Select
Activate PTZ
to enable PTZ. The address of the connected device appears against
Device ID
. Choose the
Device type
from the
drop-down list. To find which device type to use, consult the documentation supplied by the PTZ driver.
To complete the installation go to
System Options
>
Ports & Devices
>
COM Port
and verify the settings.
28
