Axis Q61 Series User Manual Download Page 59

Page: 59 / 61

AXIS Q6128-E PTZ Network Camera

Technical specifications

You can find the latest version of the technical specifications at

www.axis.com

LED Indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or

unmount the SD card from the Axis product’s webpages before removal.

This product supports SD/SDHC/SDXC cards (not included).

For SD card recommendations, see

www.axis.com

Buttons

Control Button

For location of the control button, see

Hardware overview on page 7

The control button is used for:

•

Resetting the product to factory default settings. See

page 54

•

Connecting to an AXIS Video Hosting System service. See

page 46

. To connect, press and hold the button for about 3

seconds until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 46

. To connect, press and hold the button for about 3 seconds.

Power Button

The power button is used with the control button to reset the camera to factory default settings. See

page 54

Connectors

Network connector

RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE).

Summary of Contents for Q61 Series






























































Search results

Summary of Contents for Q61 Series

Reviews:

Related manuals for Q61 Series

Brands by name

Popular brands

Axis Q61 Series, User Manual

Search results

Summary of Contents for Q61 Series

Reviews:

Related manuals for Q61 Series

Brands by name

Popular brands