Axis Q6054 Mk III User Manual Download Page 21

Page: 21 / 25

AXIS Q6054 Mk III PTZ Network Camera

Specifications

To find the latest version of the product’s datasheet, go to the product page at

axis.com

and locate

Support & Documentation

LED indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports SD/SDHC/SDXC cards.

For SD card recommendations, see

axis.com

SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered

trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

The control button is used for:

•

Resetting the product to factory default settings. See

How to reset to factory default settings on page 17

•

Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.

Power button

Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See

page 17

Connectors

Network connector

RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).

NOTICE

TICE

Use the supplied midspan.

Summary of Contents for Q6054 Mk III


























Search results

Summary of Contents for Q6054 Mk III

Reviews:

Related manuals for Q6054 Mk III

Brands by name

Popular brands

Axis Q6054 Mk III, User Manual

Search results

Summary of Contents for Q6054 Mk III

Reviews:

Related manuals for Q6054 Mk III

Brands by name

Popular brands