AXIS Q6054 Mk III PTZ Network Camera
Setup
11. Select
SD card
from the list of storage options.
12. Click
Ok
.
How to direct the camera to a preset position when the camera detects motion
This example explains how to set up the camera to go to a preset position when it detects motion in the image.
Make sure the AXIS Video Motion Detection application is running:
1. Go to
Settings > Apps
>
AXIS Video Motion Detection
.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Add a preset position:
4. Go to
Settings > PTZ
and set where you want the camera to be directed by creating a preset position.
Create an action rule:
5. Go to
Settings > System
>
Events > Action rules
and add an action rule.
6. Type a name for the action rule.
7. From the list of triggers, select
Applications
and then select
AXIS Video Motion Detection (VMD)
.
8. From the list of actions, select
PTZ Control
and then select
Preset Position
.
9. Select the preset position you want the camera to go to.
10. Click
Ok
.
How to record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and to
stop one minute after.
Make sure audio turned on:
1. Set up the stream profile to include audio, see
How to add audio to your recording on page 12
.
Make sure the audio detection is set up:
2. Go to
Settings > System > Detectors > Audio detection
.
3. Adjust the alarm level according to your needs.
Create an action rule:
4. Go to
Settings > System > Events
and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select
Detectors
and then select
Audio Detection
.
7. From the list of actions, select
Record video
and then select
Preset Position
.
8. Select the stream profile where audio has been turned on or create a new one.
9. Set the pre-trigger time to 5 seconds.
10. Set the post-trigger time to 60 seconds.
14
