AXIS Q6034 PTZ Dome Network Camera
Detectors
Detectors
Motion Detection
Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.
Motion detection is con
fi
gured by de
fi
ning up to 10 Include and Exclude windows:
•
Include windows
— de
fi
ne areas where motion should be detected
•
Exclude windows
— de
fi
ne areas within an Include window that should be ignored (areas outside Include windows
are automatically ignored).
For instructions, see
Set Up Motion Detection Windows, on page 32
.
To control the number of motion detection alarms, the parameters
Object Size
,
History
and
Sensitivity
can be adjusted. See
Motion
Detection Parameters, on page 33
.
Once motion detection windows are con
fi
gured, the Axis product can be con
fi
gured to perform actions when motion is detected.
Possible actions include uploading images and start recording. For more information, see
Setting Up an Action Rule, on page 36
.
Note
Using the motion detection feature may decrease the product’s overall performance.
Set Up Motion Detection Windows
To set up a motion detection Include Window, follow these instructions:
1. Go to
Detectors > Motion Detection
.
2. Select the
Con
fi
gure Included Windows
option and click
New
. Select the new window in the list of windows and enter
a descriptive name.
3. Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired
position) of the window.
4. Adjust the
Object Size
,
History
and
Sensitivity
pro
fi
le sliders (see
Motion Detection Parameters
for details). Any detected
motion within an active window is indicated by red peaks in the
Activity window
.
5. Click
Save
.
To exclude parts of the include window, select the
Con
fi
gure Excluded Windows
and position the exclude window within the
include window.
To delete an include or exclude window, select the window in the list of windows and click
Del
.
32