AXIS Q6032-E/Q6034-E/Q6035-E Installation Guide
Page 13
ENGL
IS
H
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS Camera Management. When the network camera appears in the window, right-click
the link and select
Live View Home Page
.
3. See page 14 for instructions on how to set the password.
Assign an IP address in a single device
1. Select network camera in AXIS Camera Management and click
the
Assign IP
button
.
2. Select
Assign the following IP address
and enter the IP
address, subnet mask and default router the device will use.
3. Click
OK
.
Assign IP addresses in multiple devices
AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices you wish to configure (different models can
be selected) and click the
Assign IP
button
.
2. Select
Assign the following IP address range
and enter the
range of IP addresses, the subnet mask and default router the
devices will use.
3. Click
Update
. Suggested IP addresses are listed under
New IP Addresses
and can be edited by
selecting a device and clicking Edit.
4. Click
OK
.
