AXIS Q3517-SLVE Network Camera
Additional settings
Record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
1. Go to
Settings > System
>
Detectors
.
2. Set shock detection to on, and set a value for the shock sensitivity.
Create an action rule:
3. Go to
Settings > System > Events
and add an action rule.
4. Type a name for the action rule.
5. From the list of triggers, select
Detectors
and then select
Shock detection
.
6. From the list of schedules, select
After Hours
.
7. From the list of actions, select
Send Video Clip
.
8. Select an existing stream profile or create a new one.
9. Enable and set the pre-trigger time to 5 seconds.
10. Enable
While the rule is active
.
11. Enable and set the post-trigger time to 60 seconds.
12. Select an existing recipient or create a new one.
13. Click
OK
.
Detect tampering with input signal
This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the
I/O connector, see
.
1. Go to
Settings > System > I/O Ports
and turn on
Supervised I/O
for one of the ports.
Create an action rule:
1. Go to
Settings > System > Events
and create an action rule.
2. Type a name for the action rule.
3. From the list of triggers, select
Input Signal
and then
Supervised input port
. Set
Tampered
to
Yes
.
4. From the list of schedules, select
Always
.
5. From the list of actions, select
Send Notification
and then select a recipient or create a new recipient.
6. Click
OK
.
Applications
Applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to
.
To find the user manuals for Axis applications, go to
18
