AXIS Q1961-TE Thermal Camera
The device interface
The context menu contains:
View recipient
: Click to view all the recipient details.
Copy recipient
: Click to copy a recipient. When you copy, you can make changes to the new recipient.
Delete recipient
: Click to delete the recipient permanently.
Schedules
Schedules and pulses can be used as conditions in rules. The list shows all the schedules and pulses currently configured in the
product, along with information about their configuration.
Add schedule
: Click to create a schedule or pulse.
Manual trigger
The manual trigger is used to manually trigger a rule. The manual trigger can for example be used to validate actions during
product installation and configuration.
MQTT
MQTT (Message Queuing Telemetry Transport) is a standard messaging protocol for the Internet of Things (IoT). It was designed for
simplified IoT integration and is used in a wide variety of industries to connect remote devices with a small code footprint and
minimal network bandwidth. The MQTT client in Axis device firmware can simplify integration of data and events produced in the
device to systems which are not video management systems (VMS).
Set up the device as an MQTT client. MQTT communication is based on two entities, the clients and the broker. The clients can
send and receive messages. The broker is responsible for routing messages between clients.
You can learn more about MQTT in
.
MQTT client
Connect
: Turn on or off the MQTT client.
Status
: Shows the current status of the MQTT client.
Broker
Host
: Enter the hostname or IP address of the MQTT server.
Protocol
: Select which protocol to use.
Port
: Enter the port number.
• 1883 is the default value for
MQTT over TCP
• 8883 is the default value for
MQTT over SSL
• 80 is the default value for
MQTT over WebSocket
• 443 is the default value for
MQTT over WebSocket Secure
Username
: Enter the username that the client will use to access the server.
Password
: Enter a password for the username.
Client ID
: Enter a client ID. The client identifier is sent to the server when the client connects to it.
Clean session
: Controls the behavior at connection and disconnection time. When selected, the state information is discarded
at connect and disconnect.
31
