AXIS Q1941-E PT Mount Thermal Network Camera
About PTZ (Pan Tilt Zoom)
2. Click
Add
.
3. Type a name.
4. Specify the pause length between runs.
5. Select a preset position from the drop-down list and click
Add
.
6. For each preset position, enter the
View Time
in seconds or minutes.
7. Specify the
View Order
of the preset positions, or select
Random view order
.
8. Click
Save
.
How to edit a guard tour
1. Go to
Setup > PTZ > Guard Tour
.
2. Select the guard tour in the
Guard Tour List
.
3. Click
Modify
.
How to delete a guard tour
1. Go to
Setup > PTZ > Guard Tour
.
2. Select the guard tour in the
Guard Tour List
.
3. Click
Remove
.
Advanced
About driver-specific settings
The Device Settings window displays driver specific settings. The appearance of this window can vary depending on the driver
installed. Options that can be configured include:
•
Driver Specific Settings for Video Source
•
Mechanical Limits for Moving Video Source
•
Extended Driver Specific Settings for Video Source
For download and installation information about PTZ drivers for your Axis product please visit www.axis.com/techsup/
About advanced PTZ settings
Advanced PTZ settings can be configured under
PTZ > Advanced > Controls
.
The
Panel Shortcut Command Buttons
list shows the user-defined buttons that can be accessed from the Live View page’s
Ctrl
panel
. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.
Click
Add
to add a new shortcut command button.
The following PTZ controls are enabled by default:
•
Pan control
•
Tilt control
To disable specific controls, deselect the options under
Enable/Disable controls
.
26
