Axis Q1765-LE PT, Installation Manual

Page: 21 / 30

English
Safety Information
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide for
future reference.
Hazard Levels
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NO NO NOTICE TICE TICE
Indicates a situation which, if not avoided, could result in
damage to property.
Other Message Levels
Important
Indicates significant information which is essential for the
product to function correctly.
Note
Indicates useful information which helps in getting the
most out of the product.
Safety Instructions
CAUTION
IR emitted from this product. Use appropriate shielding
or eye protection.
NO NO
NOTICE
TICE
TICE
•
The Axis product shall be used in compliance with local
laws and regulations.
•
Store the Axis product in a dry and ventilated
environment.
•
Avoid exposing the Axis product to shocks or heavy
pressure.
•
Do not install the product on unstable brackets, surfaces
or walls.
•
Use only applicable tools when installing the Axis
product. Using excessive force with power tools could
cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol cleaners.
•
Use a clean cloth dampened with pure water for
cleaning.
•
Use only accessories that comply with the technical
specification of the product. These can be provided by
Axis or a third party.
•
Use only spare parts provided by or recommended by
Axis.
•
Do not attempt to repair the product yourself. Contact
Axis support or your Axis reseller for service matters.
•
The power supply shall be plugged in to a socket outlet
installed near the product and shall be easily accessible.
•
Use a limited power source (LPS) with either a rated
output power limited to
≤ 100 W or a rated output
current limited to
≤
5 A.
Transportation
NO NO
NOTICE
TICE
TICE
•
When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the
product.
Battery
The Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under
normal conditions this battery will last for a minimum of
five years.
Low battery power affects the operation of the RTC, causing
it to reset at every power-up. When the battery needs
replacing, a log message will appear in the product’s server
report. For more information about the server report, see
the product´s setup pages or contact Axis support.
The battery should not be replaced unless required, but if
the battery does need replacing, contact Axis support at
www.axis.com/techsup for assistance.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl
ether (EGDME), CAS no. 110-71-4.
WARNING
•
Risk of explosion if the battery is incorrectly replaced.
•
Replace only with an identical battery or a battery which
is recommended by Axis.
•
Dispose of used batteries according to local regulations
or the battery manufacturer's instructions.
Français
Informations sur la sécurité
Lisez attentivement ce guide d'installation avant d'installer
l'appareil. Conservez le guide d'installation pour toute
référence ultérieure.
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner le décès ou des blessures graves.
ATTENTION
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner des blessures légères ou modérées.
A A AVIS VIS VIS
Indique une situation qui, si elle n'est pas évitée, pourrait
endommager l'appareil.
Autres niveaux de message
Important
Indique les informations importantes, nécessaires pour
assurer le bon fonctionnement de l’appareil.
Note
Indique les informations utiles qui permettront d’obtenir le
fonctionnement optimal de l’appareil.