Axis q1615 MK II, Installation Manual, Page: 11 / 136

AXIS Q1615 Mk II Network Camera
10 Iris connector
11
Power connector
12 Power LED indicator
13 Network LED indicator
14 RS485/RS422 connector
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure,
go to Settings > System > Plain config .
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Settings >
System > Plain config .
Status LED Indication
Green Steady green for normal operation.
Amber Steady during startup. Flashes when restoring settings.
Note
The Network LED can be disabled so that it does not flash when there is network traffic. To
configure, go to
Settings > System > Plain config .
Network LED Indication
Green
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Amber
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
Unlit No network connection.
Note
The Power LED can be configured to be unlit during normal operation. To configure, go to
Settings > System > Plain config .
Power LED Indication
Green Normal operation.
Amber
Flashes green/amber during firmware upgrade.
11
EN