Axis Q1615-E MKII, Installation Manual

Page: 12 / 154

AXIS Q1615-E Mk II Network Camera
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED Indication
Green Steady green for normal operation.
Amber Steady during startup. Flashes when restoring settings.
Red Flashes red for firmware upgrade failure.
Note
The Network LED can be disabled so that it does not flash when there is network traffic.
To configure, go to
Setup > System Options > Ports & Devices > LED . See the online
help for more information.
Network LED Indication
Green
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Amber
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
Unlit No network connection.
Note
The Power LED can be configured to be unlit during normal operation. To configure, go
to
Setup > System Options > Ports & Devices > LED . See the online help for more
information.
Power LED Indication
Green Normal operation.
Amber
Flashes green/amber during firmware upgrade.
Housing LED Indicators
Note
The housing LED referred to in the table below is located in the housing.
Alarm events will be triggered through the camera’s input port.
12