Axis Q1614, Installation Manual

Page: 14 / 124

AXIS Q1614 Network Camera
SD Card Slot
A microSD card (not included) can be used for local recording with removable storage. For more
information, see
Specifications, on page 14
.
NOTICE NOTICE NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To
unmount, go to
Setup > System Options > Storage > SD Card and click Unmount .
Control Button
The control button is used for:
• Resetting the product to factory default settings. See page 20 .
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Function Button
The function button has multiple functions:
• Levelling assistant – This function helps to ensure the camera is level. Press the button
for about 3 seconds to start the levelling assistant and press again to stop the leveling
assistant. The status LED (see
page 12 ) and buzzer signal (see page 12 ) assist levelling of
the camera. The camera is level when the buzzer beeps continuously.
•
Focus assistant
– This function is used for enabling the Focus Assistant. To enable the
focus assistant, press and very quickly release the button. Press again to stop the focus
assistant. For more information, see
page 19 .
Specifications
Operating Conditions
The Axis product is intended for indoor use.
Product Temperature Humidity
AXIS Q1614 0 °C to 50 °C
(32 °F to 122 °F)
20-85% RH (non-condensing)
14