AXIS P55-E Network Camera Series
•
Chrome
TM
or Firefox
®
with other operating systems.
For more information about using the product, see the User Manual available at
www.axis.com
Reset to Factory Default Settings
Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
Note
The installation and management software tools are available from the support pages
on
www.axis.com/techsup
To reset the product to the factory default settings:
1. Press and hold the control button and the restart button at the same time.
2. Release the restart button but continue to hold down the control button for 15–30
seconds until the status LED indicator flashes amber.
3. Release the control button. The process is complete when the status LED indicator turns
green. The product has been reset to the factory default settings. If no DHCP server is
available on the network, the default IP address is
192.168.0.90
4. Using the installation and management software tools, assign an IP address, set the
password and access the video stream
It is also possible to reset parameters to factory default via the web interface. Go to
Setup
> System Options > Maintenance
.
Further Information
The User Manual is available at
www.axis.com
Visit
www.axis.com/techsup
to check if there is updated firmware available for your network
product. To see the currently installed firmware version, go to
Setup > About
.
Visit Axis learning center
www.axis.com/academy
for useful trainings, webinars, tutorials and
guides.
Warranty Information
For information about Axis’ product warranty and thereto related information, see
www.axis.com/warranty/
17
E
N
G
L
IS
H
