
AXIS P33–VE Network Camera Series
The illustration below shows an indoor variant.
1
Locking screw
2
Lens holder
3
Lens
4
Screws
1. Open the
Live View
page, see
2. Loosen the two screws.
3. Check the
Live View
page and tilt the lens to the desired position.
4. If the lens needs to be tilted more than 90°, do the following:
-
Loosen the locking screw.
-
Rotate the lens holder 180°.
-
Fasten the locking screw.
-
Tilt the lens.
5. Tighten the two screws.
Adjust Focus and Zoom
NO
NO
NOTICE
TICE
TICE
Adjusting focus and zoom manually can damage the lens.
Note
• Due to the dome’s refraction, the image may appear slightly out of focus once the dome
has been placed. To correct this go to the Focus Adjustment web page under
Setup
>
Basic Setup
>
Focus & Zoom
, and adjust the focus again.
Open the
Focus Adjustment
page in the web interface under
Setup
>
Basic Setup
>
Focus &
Zoom
, and follow the on-screen instructions. Use the image window to adjust the focus and zoom.
See the online help files for more information.
23
Summary of Contents for P3364-VE
