Axis P32 14-VE Page 44 User Manual Download | Manualshive

Page: 44 / 55

background image

AXIS P3214-VE Network Camera

System Options

Storage

SD Card

NO

NO

NOTICE

TICE

TICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

Note

For SD card recommendations see www.axis.com

Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with
speed class 10.

The following SD card file systems are supported:

•

ext4

— recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access

data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•

vFAT

— supported by most operating systems for personal computers.

The SD card is managed on the

System Options > Storage

page. Click

SD Card

to open

Storage Management

.

If the card’s status shows as failed, click

Check disk

to see if the problem can be found and then try

Repair

. This option is only

available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under

General Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select

Lock

under

General Settings

.

Mount and Unmount SD Card

NO

NO

NOTICE

TICE

TICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual
mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1. Open the Axis product’s webpages and go to

Setup > System Options > Storage

.

2. Click

SD Card

.

3. Click

Unmount

.

4. The card can now be removed.

Format SD Card

NO

NO

NOTICE

TICE

TICE

Formatting the SD card will remove all data and recordings stored on the card.

Important

If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted
into the Axis product.

An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format the
SD card, follow these steps:

44

«
...
42
43
44
45
46
...
»

Summary of Contents for P32 14-VE
























































Reviews:

No comments

Related manuals for P32 14-VE

Brand: 3Com Pages: 20

BiPAC 4500NZ(L)

Brand: Billion Pages: 146

Brand: Salusfin Pages: 6

Brand: Zonet Pages: 10

Brand: Samsung Pages: 65

Brand: Oracle Pages: 24

Brand: U.S. Products Pages: 80

Brand: Gear Pro Pages: 14

Brand: Lorex Pages: 16

Brand: Roav Pages: 11

Brand: Intel Pages: 958

Husky HMG-1648EP

Brand: Ethernet Direct Pages: 16

Brand: CopperOptics Pages: 12

Brand: Tachyon Pages: 8

Brand: DayTronic Pages: 13

Brand: PNJcam Pages: 36

Brand: Westermo Pages: 22

Brand: Aaeon Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands