AXIS P1375 Network Camera
Specifications
Specifications
To find the latest version of the product’s datasheet, go to the product page at
and locate
Support & Documentation
.
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to
Settings > System > Plain
config
. See the online help for more information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to
Settings > System > Plain config
.
Status LED
Indication
Unlit
Connection and normal operation.
Green
Steady green for 10 seconds for normal operation after startup completed.
Amber
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Amber/Red
Flashes amber/red if network connection is unavailable or lost.
Red
Firmware upgrade failure.
Network LED
Indication
Green
Steady for connection to a 1 Gbit/s network. Flashes for network activity.
Amber
Steady for connection to a 10/100 Mbit/s network. Flashes for network activity.
Unlit
No network connection.
Status LED behavior for focus assistant
Note
Only valid for optional P-iris, DC-iris or manual iris lenses.
The status LED flashes when the Focus Assistant is active.
Color
Indication
Red
The image is out of focus.
Adjust the lens.
Amber
The image is close to focus.
The lens needs fine tuning.
Green
The image is in focus.
SD card slot
NO
NO
NOTICE
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
18
