Axis P1365, Installation Manual, Page: 14 / 108

AXIS P1365 Network Camera
Power Consumption
NO NO
NOTICE
TICE
TICE
Use a limited power source (LPS) with either a rated output power limited to ≤100W
or a rated output current limited to ≤5A.
Product PoE DC
AXIS P1365 7.9W 8–28VDC, max. 7.7W
Connectors
I/O Connector
4–pin terminal block for:
• Auxiliary power (DC output)
• Digital Input
• Digital Output
• 0 V DC (-)
1
2 3 4
Function Pin Notes
Specifications
0 V DC (-)
1
0 V DC
DC output 2 Can be used to power auxiliary equipment.
Note: This pin can only be used as power out. 12 V D C
Max load = 50 mA
Digital input – Connect to pin 1 to activate,
or leave floating (unconnected) to deactivate. 0 to max 30 V DC Configurable
(Input or
Output)
3–
4
Digital output – Connected to pin 1 when
activated, floating (unconnected) when
deactivated. If used with an inductive load,
e.g. a relay, a diode must be connected in
parallel with the load, for protection against
voltage transients. 0 to max 30 V DC, open
drain, 100 mA
14