AXIS P1365 Mk II Network Camera
Set Up the Product
6. Re-tighten the zoom puller and the lock screw for the focus ring.
7. On the
Focus
page, click
Fine-tune focus automatically
and wait until automatic fine tuning is completed.
8. Click
Enable iris
. If the button is inactive the iris is already enabled.
If needed, make further adjustments under the
Advanced
tab:
1. Always open the iris before focusing and enable it when finished focusing.
2. Use the mouse to move and resize the window and then click
Fine-tune focus automatically
.
3. If needed, click in the
Focus position
bar, or on the arrows at the ends of the bar, to further adjust the focus.
4. Click
Enable iris
. If the button is inactive the iris is already enabled.
How to adjust focus with the Focus Assistant
Note
• The view in front of the camera should not be changed during focus adjustment. If the camera is moved, or if a finger or
other object is placed in front of the lens, restart the procedure.
• If movements in front of the camera cannot be avoided, the Focus Assistant should not be used.
• If the control button is not released within two seconds, AXIS Internet Dynamic DNS Service is enabled instead of the Focus
Assistant. For more information about AXIS Internet Dynamic DNS Service, see the User Manual available at
www.axis.com
If the Status LED flashes either red or amber before you are able to adjust the lens, exit the Focus Assistant and restart the procedure.
See
Status LED behavior for focus assistant on page 72
.
1. Open the product’s home page and go to
Setup
>
Basic Setup
>
Focus
.
2. Under the
Basic
tab, click
Open iris
. If the button is inactive the iris is already open.
3. If focus has been set before, click
Reset
to reset the back focus.
4. Mount or place the camera so that it cannot be moved.
5. Loosen the zoom puller by turning it anti-clockwise. Move the puller to set the zoom level. Retighten the zoom puller.
6. Set the camera to its extreme distant-focus position by loosening the lock screw for the focus ring and turning the
focus ring fully clockwise.
7. Press and quickly release the control button. When the status indicator flashes, the Focus Assistant is enabled.
8. Gently turn the focus ring anti-clockwise until it stops.
9. Turn the focus ring slowly clockwise until the status indicator flashes green.
10. To exit the Focus Assistant, press the control button. If you cannot access the control button, the Focus Assistant switches
off automatically after 15 minutes.
11. Re-tighten the lock screw for the focus ring.
12. Open the Live View page in the web browser and check the quality of the image.
13. On the
Focus
page, click
Fine-tune focus automatically
and wait until automatic fine tuning is completed.
14. Click
Enable iris
. If the button is inactive the iris is already enabled.
If needed, make further adjustments under the
Advanced
tab:
1. Always open the iris before focusing and enable it when finished focusing.
2. Use the mouse to move and resize the window and then click
Fine-tune focus automatically
.
18
